Oils & Lubricants

Fleetline Multi-Trac Universal Tractor Fluid is a superior performance multipurpose tractor hydraulic/transmission fluid. Approved for transmissions, wet brakes, power take-offs, differentials, final drives, power steering and hydraulic systems employing a common fluid reservoir. This universal fluid is designed to handle the severe duty facing today’s on and off-road equipment.

Fleetline Multi-Trac Universal Tractor Fluid excels in the following areas:
• Excellent thermal oxidation stability for high temperature applications
• Specialty rust and oxidation, anti-wear, and extreme pressure additives are designed to minimized wet brake and power take-off chatter
• Premium base oils selected to prolong seal life
• High viscosity index and shear stability
• Superior low temperature properties allowing for operation in cold winter environments

Fleetline Multi-Trac Universal Tractor Fluid is recommended for use in the following applications:
• Powershift transmissions specifying Allison C-3/C-4 or CAT TO-2 fluids
• Ford New Holland M2C-41-B, M2-C48-B, M2-C48-C, M2-C86-C, M2-C134-D
• John Deere J20C
• Kubota UDT
• Massey Ferguson M-1145
• Vickers 35VQ25
• Dennison HF-0, HF-1, HF-2

Fleetline Anti-Wear (AW) Hydraulic Oils are superior performance oils, formulated with a zinc/phosphorous additive package to provide exceptional anti-wear protection to critical hydraulic system components. These oils are designed for use in most industrial, marine and mobile equipment hydraulic systems.

Fleetline Anti-Wear (AW) Hydraulic Oils are ideal for circulating systems, piston pump or vane pumps, and other applications where an anti-wear hydraulic oil is required.

These quality hydraulic oils provide:
• Zinc/phosphorous anti-wear additive to minimize wear in high-speed, high-pressure vane, gear and piston pumps
• Excellent rust, corrosion and oxidation inhibitors
• Excellent anti-foam protection for controlled release of entrained air
• Outstanding demulsibility for fast water separation

Fleetline Anti-Wear (AW) Hydraulic Oils are recommended for use in most stationary and mobile hydraulic systems, including elevators, lifts, hoists, winches and machine tools.

These oils also meet the following performance requirements in the appropriate viscosity grades (refer to equipment manual):
• Chrysler, General Motors LS-2
• Cincinnati Machine P-68, P-69, P-70
• Denison HF-0, HF-1, HF-2
• DIN 51524 part II
• Vickers M-2950-S, I-286-S
• Ford M6C32
• US Steel 136
• Eaton 35VQ25

SuperFleet XHD Engine Oils are formulated for use in the latest 2017 EPA, high output, low-emission engines, including those with Exhaust Gas Recirculation (EGR) and exhaust after treatment systems with Diesel Particulate Filters (DPFs) and Diesel Oxidation Catalysts (DOCs).

SuperFleet XHD Engine Oils deliver outstanding performance that helps to
extend engine life in both new engines and older conventional engines in the
most severe on- and off-highway applications. Designed specifically for
engines using Ultra Low Sulfur Diesel (ULSD), these oils are formulated with:
• Advanced soot control chemistry
• State-of-the-art wear control
• Exceptional oxidation and thermal protection for operating at extreme temperatures

Recommended for use in heavy-duty service in commercial trucks, construction equipment, farm equipment, stationary engines, and other diesel-fueled engine applications.

SuperFleet XHD Engine Oils meet or exceed the following requirements:
• Caterpillar ECF-3
• Cummins CES 20086
• Mack EOS-4.5
• Detroit Diesel 93K222
• Volvo VDS-4.5
• Mercedes Benz 228.31

CERAN XM 220

APPLICATIONS:
--CERAN XM 220 is made of the New Generation calcium sulfonate complex soap designed by TOTAL Lubrifiants. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high speeds.

--CERAN XM 220 is suitable for the lubrication of all kinds of components subject to high loads, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances).

--CERAN XM 220 is suitable for the lubrication of continuous castings and rolling mills in steel plants, bearings in wet and dry (felt rolls) sections of paper mills and all industrial applications under severe conditions (wet, loaded, high temperature, dust,...)

--CERAN XM 220 is suitable for use in centralized greasing systems.

ADVANTAGES:
--The New Generation of calcium sulfonate complex soap developed by TOTAL Lubrifiants allows CERAN XM 220 to work well in bearings even if rotation speeds are high. CERAN XM 220 presents outstanding performances even at high nDm where the New Generation keeps all benefits in terms of corrosion protection, bearings lifetime, high loads and thermal resistance.

--Excellent anti-oxidation and anti-corrosion properties thanks to the excellent behavior of the calcium sulfonates, also in the presence of sea water.

--The New Generation of calcium sulfonate complex soap allows to keep outstanding CERAN XM 220 performances even in case of high speed applications where normally polyurea or lithium complex greases are requested.

--CERAN XM 220 does not contain lead, or other heavy metals considered harmful to human health and the environment.